Introduction
The PS4 controller is an essential accessory for any serious gamer. However, after prolonged use, the battery life of the controller may start to deteriorate. Instead of buying a new controller, you can save money by replacing the battery yourself. In this article, we will guide you step-by-step on how to replace the battery in your PS4 controller.
What You’ll Need
Before you begin, make sure you have the following tools and materials:
- A small Phillips screwdriver
- A replacement battery compatible with the PS4 controller
- A plastic opening tool or a spudger
- Tweezers
Step 1: Prepare Your Workspace
Find a clean and well-lit area to work on your controller. Make sure you have enough space to lay out all the tools and components without losing anything.
Step 2: Remove the Screws
Flip your PS4 controller over and locate the five screws on the back. Use the small Phillips screwdriver to remove these screws and set them aside in a safe place. Be careful not to lose them.
Step 3: Open the Controller
Once the screws are removed, use the plastic opening tool or spudger to gently pry open the controller. Start at one corner and work your way around, applying slight pressure until the controller comes apart. Be cautious not to use excessive force to avoid damaging any internal components.
Step 4: Disconnect the Battery
Inside the controller, you will see a small rectangular battery connected to the circuit board. Use the tweezers to gently disconnect the battery’s connector from the circuit board. Take note of the battery’s orientation and how it is connected before removing it.
Step 5: Replace the Battery
Take your new replacement battery and connect it to the circuit board, ensuring it is properly aligned. Double-check that the battery is connected in the correct orientation to avoid any damage.
Step 6: Reassemble the Controller
Carefully put the controller back together, aligning the two halves and applying gentle pressure until they snap back into place. Make sure the controller feels secure and all edges are flush.
Step 7: Secure the Screws
Retrieve the screws you set aside earlier and use the Phillips screwdriver to tighten them back into place. Ensure the screws are snug but not overly tight to prevent any damage to the controller’s casing.
Step 8: Test the Controller
Now that you have replaced the battery and reassembled the controller, it’s time to test it. Connect the controller to your PS4 console using a USB cable and check if it charges and functions properly. If everything works as expected, you have successfully replaced the battery in your PS4 controller!
Conclusion
Replacing the battery in your PS4 controller is a straightforward process that can save you money and extend the lifespan of your controller. By following the steps outlined in this article, you can enjoy longer gaming sessions without worrying about a dying battery. Remember to always work carefully and consult a professional if you encounter any difficulties.