Introduction
In this article, we will guide you on how to replace the battery of your PS5 controller. As the battery life of the controller decreases over time, it becomes necessary to replace it in order to continue enjoying your gaming sessions without any interruptions. Follow the steps below to easily replace the battery of your PS5 controller.
Step 1: Gather the Required Tools
Before you begin the replacement process, make sure you have the necessary tools. You will need a screwdriver (preferably a small Phillips-head screwdriver) and a replacement battery compatible with the PS5 controller. Ensure that the replacement battery is of good quality and has the same specifications as the original one.
Step 2: Prepare the Controller
Turn off your PS5 console and disconnect the controller from it. Flip the controller upside down and locate the screw(s) that hold the back cover in place. Use the screwdriver to carefully remove the screw(s) and set them aside in a safe place.
Step 3: Remove the Back Cover
Once the screw(s) have been removed, gently pry open the back cover of the controller using your fingers or a plastic opening tool. Be cautious not to apply too much force to avoid damaging the controller. Slowly lift off the back cover to reveal the internal components.
Step 4: Remove the Old Battery
Locate the battery inside the controller. It is usually a rectangular-shaped component with wires connected to it. Carefully unplug the connector from the battery by gently pulling it away. Take note of how the battery is positioned inside the controller for easy installation of the new battery.
Step 5: Install the New Battery
Take the new battery and connect it to the controller by plugging in the connector. Ensure that it is securely connected. Place the new battery in the same position as the old one, making sure it fits properly. Double-check the placement to avoid any issues later on.
Step 6: Reassemble the Controller
Carefully place the back cover of the controller back into position. Press it down gently until it snaps into place. Make sure all the edges are aligned properly. Once the back cover is securely in place, use the screwdriver to reinsert the screw(s) and tighten them.
Step 7: Test the Controller
Now that the battery has been replaced and the controller is reassembled, it’s time to test it. Connect the controller to your PS5 console and turn it on. Check if the controller is functioning properly and if the battery is charging as expected.
Conclusion
By following the steps outlined in this article, you can easily replace the battery of your PS5 controller. Remember to handle the controller and the internal components with care to avoid any damage. With a new battery, you can enjoy uninterrupted gaming sessions on your PS5 console.